User Manual

MonoBright LED Bi-Color 750 - USER MANUAL
14
12 V DC BATTERY
To power the MonoBright Bi-Color via a 12 V
DC battery, make sure both the MonoBright
Bi-Color and the battery are turned off,
and use a compatible Genaray MonoBright
battery cable to connect the MonoBright
Bi-Color’s DC XLR power socket to your
12 V DC battery. Both the battery and
the cable are available separately.
For batteries with an XLR connector,
use the Genaray MB-BCXLR cable. For
batteries with a cigarette lighter connector,
use the Genaray MB-BCCL cable.
Note: Use only Genaray MonoBright
battery cables with MonoBright LED lights.
Cables from other manufacturers may be
incompatible and may cause damage.
Important!
Make sure to connect and disconnect
the XLR plug only when the MonoBright
Bi-Color’s power switch is in the Off
position, and your 12 V DC battery is
turned off if it has a power switch.
Make sure the connections to the
MonoBright Bi-Color and battery are
securely locked before turning on the
MonoBright Bi-Color and battery power.
To turn on the MonoBright Bi-Color,
first turn on your 12 V DC battery (if it
has a power switch) and then press the
MonoBright Bi-Color’s power switch.
INSTRUCTIONS