SpectroLED ESSENTIAL 500II LIGHT USER MANUAL
THANK YOU FOR CHOOSING GENARAY SP-E-500II INTRODUCTION The SpectroLED Essential Bi-Color LED and Daylight LED lights have a sturdy housing that’s designed for use in the studio or on location. They produce bright, consistent light powered by AC power or by two Sony-style NP-F batteries. The daylight version generates a 5600 K daylight-balanced light. The bi-Color version has a variable color temperature that allows you to choose from 3200 to 5600 K.
· Please read and follow these instructions, and keep this manual in a safe place. · Do not stare directly at the lights when they are powered on. · Keep this unit away from water and any flammable gases or liquids. · Keep this unit away from children. · Use only the recommended batteries. · Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Genaray will not be responsible for any damage. · Handle the unit with care.
Front LED array PRODUCT OVERVIEW Diffusion notches (4) 4 Tightening knob SpectroLED ESSENTIAL 500II LIGHT - USER MANUAL Baby 5/8” Mounting receiver Yoke mounts and adjustment knobs (2)
Back Color temperature knob (SP-E-500IIB Only) NP-F battery mount(2) PRODUCT OVERVIEW Dimming Knob Power button DC input 1/4-20 sockets (2) Cold shoe stacking mounts (4) SpectroLED ESSENTIAL 500II LIGHT - USER MANUAL 5
CONTENTS INCLUDE KEY FEATURES CONTENTS · Light Panel · Portable, lightweight LED light · Yoke · Dimming from 100% to 0% · AC to DC adapter · Daylight version produces 5600 K light · AC power cord · Diffuser · Stacking clips (×2) · Bi-color version has adjustable color temperature from 3200 to 5600 K · AC/DC power · Optional Sony NP-F battery power · Yoke and 1/4-20 mounting options · Ability to stack up to three units · Offset diffuser 6 SpectroLED ESSENTIAL 500II LIGHT - USER MANUAL
Horizontally mounted INSTRUCTIONS MOUNTING THE SPECTROLED ESSENTIAL LIGHTS The SpectroLED Essential LED lights come with a preinstalled yoke, allowing you to easily balance and adjust the tilt of the light. The yoke can be mounted horizontally or vertically on a light stand, allowing the user to position the device in a way that the yoke doesn’t block the light. The yoke has a standard 5/8-inch mount to fit most light stands.
MOUNTING THE SPECTROLED ESSENTIAL LIGHTS (CONTINUED) INSTRUCTIONS To remove the yoke, unscrew the two adjustment knobs from the sides. The Essential-series LED lights are also equipped with stacking mounts, allowing you to connect up to three units to create a vast array of additional lighting options. To stack your units, slide the stacking clips into the stacking mounts on one of the devices. Then slide the second light to the first unit’s stacking clips. Make sure it locks in place.
POWERING THE LIGHTS INSTRUCTIONS The SpectroLED Essential LED lights come with an included AC/DC cable, allowing for a nearly limitless power supply from a standard electrical outlet. To power your light, plug the AC/DC adapter into a power outlet, and the other end into your device’s DC input port on the back of the unit.
ADJUSTING THE LIGHT OUTPUT INSTRUCTIONS The SpectroLED Essential LED lights’ output is controlled with the Dimming knob on the back of the device. Turn the knob clockwise to adjust the brightness output from 0% to 100%. Turn the knob counterclockwise to dim the light. The bi-color version also includes a color temperature knob, allowing you to change the color temperature from daylight (5600 K) to tungsten (3200 K).
SPECIFICATIONS LED Chip Type: Standard Housing Material: ABS Plastic Beam Angle: 60° Number of LEDs: 504 Color temperature: S P-E-500IIB: 3200 to 5600 K SP-E-500IID: 5600 K Expected Lamp Life: 30,000 hr. SPECIFICATIONS Light Fixture AC Input Power: 100 to 240 V CRI: SP-E-500IIB: 96.2 (5600 K), 96.2 (4400 K), 95.7 (3200 K SP-E-500IID: 96.0 DC Input Power: NP-F Batteries 7.2 to 7.4 V Power Source: AC Outlet, NP-F battery (×2) TLCI: SP-E-500IIB: 95.7 (5600 K), 95.3 (4400 K), 93.
ONE-YEAR LIMITED WARRANTY This GENARAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
