User Manual

Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
13
Setting the Channel
The remote and Powerhouse must
be set to the same channel and group
for wireless remote operation.
Channel Selection
Press the channel button to highlight the
channel number, and use the up/down
buttons to select the desired channel.
Group Selection
Select a group by pressing the appropriate
group button. To select group E, press and
hold the group D button. In LED, mode
the brightness level will be highlighted.
Adjusting Brightness
Press the group button to highlight
the brightness level of the group
you want to adjust. Use the up/down
buttons to adjust the brightness.
All Powerhouse lights that are set
to the same channel and group will
be adjusted to the same brightness
level. To adjust the brightness
of each light individually, assign
each light to a different group.
Note
instructions