User Manual

12
Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
REMOTE
OPERATION
The Powerhouse’s brightness can be
controlled by the included 2.4 GHz wireless
remote. The integrated receiver has 16
channels and five groups, so you can
control several Powerhouse fixtures with
a single remote from up to 300 feet away.
Powering On the Remote
Press and hold the power button
until the screen illuminates.
Mode Selection
Important! The PH300-LED will operate with
the remote only when LED mode is selected.
The remote defaults to LED
mode when it's powered on.
Flash mode is not functional
with the PH300-LED light.
Note
If the screen shows FLASH, the remote
is in Flash mode. Press and hold the
mode selector to switch to LED mode.
instructions