Powerhouse 330-WATT DAYLIGHT LED MONOLIGHT USER MANUAL
Thank you for choosing Genaray Powerhouse INTRODUCTION The Genaray 330-watt Powerhouse Monolight features an advanced Chip-On-Board (COB) array that outputs a brilliant 63,000 lux for a powerful constant light source that will deliver plenty of power, even when used with a softbox. This compact LED array eliminates multiple shadows that are common in LED lighting.
PRECAUTIONS · Keep this unit away from water and any flammable gases or liquids. · Make sure the unit is powered off when plugging it into a power source. · Use only the correct, recommended voltage. · Handle the unit with care. Precautions · Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Genaray will not be responsible for any damage. · Please read and follow these instructions, and keep this manual in a safe place.
Power switch Tilt locking knob PRODUCT OVERVIEW Channel button Channel indicator light LCD screen Adjustment knob Group button Group indicator light Power socket 4 Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
Umbrella pass-through Reflector release button Handle Product Overview Umbrella mount and locking knob Reflector Yoke Locking knob 5/8 in.
Group buttons (for brightness adjustment only) Color temperature buttons (for bicolor lights only) PRODUCT OVERVIEW Lock switch Power Button USB port Channel select button Audio alert/mute selector (flash mode only) Up button Down button / Mode selector (for flash systems only) Mounting foot 6 Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
Power cable CONTENTS INCLUDE · Powerhouse 330-Watt LED Monolight · Reflector · Power supply CONTENTS Power supply switch · Power cord Hanging strap · Hanging strap · Yoke · Remote · User manual Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL 7
POWERING THE POWERHOUSE MOUNTING THE POWERHOUSE Mount the Powerhouse on any heavyduty light stand with a 5/8-inch baby-pin, and turn the locking knob until secure. The Powerhouse is powered directly from an AC outlet. INSTUCTIONS Important! The Powerhouse is a multivoltage fixture capable of running on 100–240 V, 50/60 Hz. The included cable has a 120 V, 50 Hz plug. To use this fixture with other voltages, you must use a plug adapter (sold separately).
OPERATING THE POWERHOUSE The Powerhouse includes a 7-inch reflector, but it’s compatible with Bowens-mount accessories. To attach the reflector: To remove the reflector, push and hold the release button, and rotate the reflector counterclockwise. Instructions Attaching the Reflector Insert the three mounting studs into the notches on the fixture. Turn the reflector clockwise until it clicks into place.
Attaching an Umbrella Instructions When you attach the reflector, make sure the umbrella pass-through is on the same side as the umbrella mount. Note Insert the shaft of the umbrella through the umbrella pass-through, and then through the umbrella mount. Tighten the locking knob until secure. 10 Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL Other brands’ Bowens-style reflectors will work with the Powerhouse.
Adjusting the Brightness Instructions The Adjustment Knob controls the brightness from 100% to 0% in 10% increments. Setting the Channel and Group The Powerhouse and remote must be set to the same channel and group for wireless remote operation. Channel Selection Press the CHANNEL button on the Powerhouse. While the channel indicator light is on, use the adjustment knob to select channel 1 to 16. Group Selection Press the GROUP button.
REMOTE OPERATION Note Flash mode is not functional with the PH300-LED light. Instructions The Powerhouse’s brightness can be controlled by the included 2.4 GHz wireless remote. The integrated receiver has 16 channels and five groups, so you can control several Powerhouse fixtures with a single remote from up to 300 feet away. If the screen shows FLASH, the remote is in Flash mode. Press and hold the mode selector to switch to LED mode.
Adjusting Brightness The remote and Powerhouse must be set to the same channel and group for wireless remote operation. Press the group button to highlight the brightness level of the group you want to adjust. Use the up/down buttons to adjust the brightness. Channel Selection Press the channel button to highlight the channel number, and use the up/down buttons to select the desired channel. Note Group Selection Select a group by pressing the appropriate group button.
PRODUCT SPECIFICATIONS Specifications LED chip type: COB Working voltage: 100 to 240 V AC, 50/60 Hz Color temperature: 5600 K ±200 K Mount: 5/8 in. Luminance: 63,000 lx @ 3 ft. Channels and groups: 16 channels, 5 groups (A, B, C, D, E) Coverage: 120° TLCI: ≥95 Dimensions: 16 × 9 × 9 in. (40.4 × 22.9 × 22.9 cm) with yoke and handle Output power: 330 W Weight: 7.75 lb. (3.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG2
