User Manual

MonoBright LED Bi-Color 750 - USER MANUAL
12
is proprietary to the Raya Speed Ring,
you would need to make sure that the
Raya Speed Ring is compatible with the
MonoBright. In this case, the Raya Speed
Ring is compatible with the MonoBright’s
S-mount, so you’re good to go.
THE UMBRELLA RECEPTACLE
The MonoBright Bi-Color is built with an
integrated umbrella receptacle. To install
an umbrella, insert your umbrella shaft
into the umbrella receptacle and tighten
the umbrella thumbscrew until secure.
Note: When attaching an accessory with
an umbrella hole, such as the included
reflector, make sure the accessory’s
umbrella hole is aligned with the
MonoBright’s umbrella receptacle
located above the mounting socket.
2. Insert your accessory into the
S-mount and rotate it clockwise
until it locks into place.
If desired, the included diffuser cover
can be stretched over the 7˝ reflector
to help soften the light output.
To remove the accessory, pull the
accessory release and rotate the
accessory counterclockwise.
When mounting a softbox, make sure your
softbox’s speed ring is compatible with
the S-mount. For example, if you want to
mount the Raya 32˝ Octa Soft Box, which
INSTRUCTIONS