User's Manual

PortaBright 100 W Daylight Monolight - USER MANUAL
12
USING THE PORTABRIGHT
WITH BATTERY POWER
Make sure the power switch is in
the off position, and the fixture is
not plugged into a wall outlet.
Install the battery (see Charging and
Installing the Battery above).
To turn on the fixture, press the
power switch to the DC position.
The battery status indicator on the LCD
screen displays the remaining battery power.
4/4 100% to 75%
3/4 75% to 50%
2/4 50% to 25%
1/4 25% to 10% (light will not operate 10%)
OPERATING THE LIGHT
SETTING THE BRIGHTNESS
When it’s powered on, the PortaBright
defaults to brightness mode.
Use the adjustment dial to change
the brightness from 100% to
0% in 10% increments.
instructions