User's Manual

LightSeeker Remote for Powerhouse, PortaBright, and Endeavor Monolights - USER MANUAL
6
Color Temperature
1. Press the group’s color temperature
button to highlight the current setting.
To access group E, press and hold
the group D power button until
group E appears on the display.
Press and hold the group E power
button to return to group D.
2. Use the up/down buttons to change
the color temperature from 3200
to 6500 K in 100 K increments.
Brightness
1. Press the group’s power button to
highlight the current setting.
To access group E, press and hold
the group D power button until
group E appears on the display.
Press and hold the group E power
button to return to group D.
2. Use the up/down buttons to
adjust the brightens from OFF
to 100% in 10% increments.
ADJUSTING THE
SETTINGS
instructions