User Manual

Endeavor 150-Watt Daylight LED Monolight - USER MANUAL
8
ATTACHING THE REFLECTOR
The Endeavor includes a 7-inch reflector
and is compatible with Bowens-mount
accessories. To attach the reflector:
1. Insert the three mounting studs
into the notches on the fixture.
2. Turn the reflector clockwise
until it clicks into place.
To remove the reflector, push and
hold the release button, and rotate
the reflector counterclockwise.
ATTACHING AN UMBRELLA
1. Make sure the reflector’s
umbrella pass-through is aligned
with the umbrella mount.
2. Insert the umbrella’s shaft through
the umbrella pass-through, and then
through the umbrella mount.
3. Tighten the locking knob until secure.
OPERATING THE
ENDEAVOR
instructions