User Manual

Endeavor 150-Watt Daylight LED Monolight - USER MANUAL
7
POWERING THE
ENDEAVOR
WITH DC POWER
The Endeavor can be powered by V-mount
batteries, using the Genaray BA-VMOUNT
dual-battery adapter (available separately).
Dual 14.8-volt, 160-watt-hour V-mount
batteries will power the Endeavor
for approximately one hour.
Use the 3-pin XLR cable that’s included
with the BA-VMOUNT to connect the
battery adapter to the Endeavor. Refer to
the BA-VMOUNT user manual for further
information and mounting instructions.
FROM AN AC OUTLET
Warning!
The Endeavor is a powerful light. Do not look
directly into the light when it’s powered on.
Connect the AC power cable to the
Endeavor and to an AC outlet.
Turn on the power switch.
instructions