User Manual

MonoBright Wireless Transmitter - USER MANUAL
9
INSTRUCTIONS
WIRELESSLY
ADJUSTING
POWER OUTPUT
The transmitter can wirelessly adjust
multiple MonoBrights to change
them all to the same output. It also
has a special 00 channel mode for
adjusting the MonoBrights while
they maintain separate outputs.
Uniform Power Output:
You can use the transmitter to wirelessly
adjust the power output of one or more
Genaray MonoBright units, setting them to
the same output. To adjust the power output
via the transmitter, follow these steps:
1. If you are using multiple MonoBright
units, make sure they and the transmitter
are all set to the same channel.
2. Press the transmitter’s mode ( ) button
repeatedly to cycle through the modes
until the transmitter’s blue ( ) status
LED glows to indicate output mode.
3. Use the transmitter’s plus
( ) and minus ( ) buttons to
adjust the MonoBright’s output.
Note: When adjusting the output on
multiple MonoBright units that are set to
the same channel but are set to different
output levels, the output settings on both
units will jump to match the transmitter’s
output setting. For example, if one unit
is set to 30, another is set to 50, and the
transmitter is set to 40, pressing the
plus ( ) button on the transmitter will
equalize both units at an output of 41.