User Manual

MonoBright Wireless Transmitter - USER MANUAL
6
ADJUSTING COLOR
TEMPERATURE
INSTRUCTIONS
To adjust the color temperature via
the transmitter, follow these steps:
1. Make sure the transmitter and the
MonoBright are set to the same channel.
Note: The MonoBright’s color
temperature setting will appear on
the control panel’s display only if
the MonoBright’s control panel is
set to color temperature mode.
2. Press the transmitter’s mode ( )
button repeatedly to cycle through
the modes until the transmitter’s
orange ( ) status LED glows to
indicate color temperature mode.
3. Use the transmitter’s plus ( )
and minus ( ) buttons to adjust the
MonoBright’s color temperature.
You can use the transmitter to wirelessly
adjust the color temperature of one
or more MonoBright Bi-Color units
from 3200–5600 K (±300 K). When
wirelessly adjusting multiple MonoBright
Bi-Colors, you can change the color
temperature uniformly or use the
transmitter’s 00 channel mode to adjust
them simultaneously at separate color
temperatures.
Note: The transmitter’s bicolor mode works
only on the MonoBright Bi-Color models
and has no effect on daylight-only models.
Uniform Color Temperature:
You can use the transmitter to wirelessly
adjust the color temperature of one or
more MonoBright Bi-Color units, setting
them to the same color temperature.