User Manual

MonoBright Wireless Transmitter - USER MANUAL
5
INSTRUCTIONS
TURNING ON THE
TRANSMITTER AND
SETTING THE CHANNEL
You can use the wireless transmitter to
control your MonoBright unit remotely
from a distance of up to 98′ (30 m).
The transmitter lets you adjust power
output and activate sleep mode. You
can also use the transmitter to control
multiple MonoBright units, even if
they are set to different channels.
The wireless transmitter runs on two AAA
batteries (available separately). Install
the batteries in the proper orientation.
Before using the transmitter, make
sure your MonoBright is turned on.
To turn on the transmitter, press
the transmitter’s power button.
To set the transmitter’s channel,
follow these steps:
1. Make sure the transmitter and the
MonoBright are set to the same channel.
2. Press the transmitter’s mode ( )
button repeatedly to cycle through
the modes until the channel mode
appears on the transmitter’s display.
In channel mode, neither of the
transmitter’s status indicators will glow.
3. Use the plus ( ) and minus ( )
buttons to select the channel.
For setting the MonoBright unit’s channel,
refer to your MonoBright’s user manual.