User Manual

MonoBright Wireless Transmitter - USER MANUAL
12
MonoBright:
The MonoBright incorporates a sleep
mode that is activated by the transmitter.
To activate the MonoBright’s sleep
mode, press and hold the transmitter’s
power ( ) button in output mode until
the MonoBright’s LED turns off and
“OF” appears on the displays of both
the MonoBright and the transmitter.
Tip: You can also do this in 00 channel
mode to simultaneously activate sleep
mode on all your MonoBright units.
In 00 mode, 00 will remain on the
transmitter’s display, rather than OF.
INSTRUCTIONS
To reactivate the MonoBright, press the
transmitter’s power ( ) button. The
MonoBright’s LED will turn on, and the
power output will appear on the displays of
both the MonoBright and the transmitter.
Note: If you turn off the MonoBright via
its power switch without exiting sleep
mode, the unit will automatically enter
sleep mode the next time you turn it on.
Transmitter:
The transmitter automatically enters
sleep mode after 15 seconds of
inactivity. Press the power ( ) button
to reactivate the transmitter.
SLEEP
MODE