User Manual

MonoBright LED Daylight 750 - USER MANUAL
21
MonoBright:
The MonoBright incorporates a sleep
mode that is activated by the transmitter.
To activate the MonoBright’s sleep
mode, press and hold the transmitter’s
power ( ) button in output mode until
the MonoBright’s LED turns off and
“OF” appears on the displays of both
the MonoBright and the transmitter.
To reactivate the MonoBright, press the
transmitter’s power ( ) button. The
MonoBright’s LED will turn on, and the
power output will appear on the displays of
both the MonoBright and the transmitter.
INSTRUCTIONS
SLEEP
MODE
Note: If you turn off the MonoBright via
its power switch without exiting sleep
mode, the unit will automatically enter
sleep mode the next time you turn it on.
Transmitter:
The transmitter automatically enters sleep
mode after 10 seconds. Press the power ( )
button to reactivate the transmitter.