User Manual

MonoBright LED Daylight 750 - USER MANUAL
19
When using multiple MonoBright units
at different output settings, you can
adjust them incrementally with a single
transmitter while maintaining the difference
in their outputs. For example, you can
set one MonoBright at I0 and another
at 20, and use the transmitter to adjust
them to II and 2I, I2 and 22, and so on.
To adjust the power output via the
transmitter, follow these steps:
1. Set each MonoBright unit to a
different channel (see Selecting
Channels on page 16).
2. Adjust each MonoBright to the desired
power output via their control panels.
You can also use the transmitter to
set the output on each MonoBright
unit to the desired setting:
Note: When adjusting the output on multiple
MonoBright units that are set to the same
channel but are set to different output levels,
the output settings on both units will jump
to match the transmitter’s output setting.
For example, if one unit is set to 30, another
is set to 50, and the transmitter is set to 40,
pressing the plus button on the transmitter
will equalize both units at an output of 41.
Multiple Power Outputs:
You can create a sophisticated lighting
setup by positioning MonoBright units
individually or in groups to function
as main, fill, accent, and other lights.
Setting the units at different power
outputs to achieve specific looks affords
a professional level of creative control.
INSTRUCTIONS