User Manual

MonoBright LED Daylight 750 - USER MANUAL
18
Uniform Power Output:
You can use the transmitter to wirelessly
adjust the power output of one or more
Genaray MonoBright units, setting them to
the same output. To adjust the power output
via the transmitter, follow these steps:
1. If you are using multiple MonoBright
units, make sure they and the transmitter
are all set to the same channel.
2. Press the transmitter’s mode ( ) button
repeatedly to cycle through the modes
until the transmitter’s blue ( ) status
LED glows to indicate output mode.
3. Use the transmitter’s plus ( )
and minus ( ) buttons to adjust
the MonoBright’s output.
1. Press the transmitter’s mode ( )
button repeatedly to cycle through
the modes until the channel mode
appears on the transmitter’s display.
In channel mode, neither of the
transmitter’s status indicators will glow.
2. Use the plus ( ) and minus ( )
buttons to select the channel.
For setting the MonoBright unit’s channel,
see Selecting Channels on page 16 .
WIRELESSLY ADJUSTING
POWER OUTPUT
The transmitter can wirelessly adjust
multiple MonoBrights to change them all
to the same output. It also has a special 00
channel mode for adjusting the MonoBrights
while they maintain separate outputs.
INSTRUCTIONS