User Manual

MonoBright LED Daylight 750 - USER MANUAL
17
The wireless transmitter runs on 2 AAA
batteries (available separately). Install
the batteries in the proper orientation.
Before using the transmitter, make
sure the MonoBright is turned on.
*Note: The transmitter incorporates a
bicolor mode (indicated by the transmitter’s
orange ( ) status LED) that has no effect
on daylight-only models, such as this one.
TURNING ON THE TRANSMITTER
AND SETTING THE CHANNEL
To turn on the transmitter, press the
transmitter’s power ( ) button.
Make sure the transmitter and the
MonoBright are set to the same
channel. To set the transmitter’s
channel, follow these steps:
INSTRUCTIONS
You can use the wireless transmitter to
control the MonoBright unit remotely
from a distance of up to 98´ (30 m).
The transmitter lets you adjust power
output and activate sleep mode. You
can also use the transmitter to control
multiple MonoBright units, even if
they are set to different channels.
THE WIRELESS
TRANSMITTER
Bi-Color
Orange (
)
Channel
None
Power Output
Blue (
)
Channel
None
Power Output
Blue (
)
Press the Mode button to cycle through the
three modes. The status LEDs indicate the
current mode.