User Manual

MonoBright LED Daylight 750 - USER MANUAL
14
12 V DC BATTERY
To power the MonoBright via a 12
V DC battery, make sure both the
MonoBright and the battery are turned
off, and use a compatible Genaray
MonoBright battery cable to connect the
MonoBright’s DC XLR power socket to
your 12 V DC battery. Both the battery
and the cable are available separately.
For batteries with an XLR connector,
use the Genaray MB-BCXLR cable. For
batteries with a cigarette lighter connector,
use the Genaray MB-BCCL cable.
Note: Use only Genaray MonoBright
battery cables with MonoBright LED lights.
Cables from other manufacturers may be
incompatible and may cause damage.
Important!
Make sure to connect and disconnect the
XLR plug only when the MonoBright’s
power switch is in the Off position, and
your 12 V DC battery is turned off if
it has a power switch. Make sure the
connections to the MonoBright and battery
are securely locked before turning on
the MonoBright and battery power.
To turn on the MonoBright, first turn on your
12 V DC battery (if it has a power switch) and
then press the MonoBright’s power switch.
INSTRUCTIONS