User Manual

Escort LED Lights - USER MANUAL
19
Tip: Adjusting the color temperature
between 3200 K and 5600 K will have
an effect on the white balance of your
photographs. Try using AWB (auto white
balance) on your camera when adjusting
the color temperature of the ESBF-75.
To adjust the color temperature with the
remote, and for more information about
using the remote with a multi-light setup,
refer to the user manual included with
the Genaray MB-WRT wireless remote.
Full-Power Mode
Full-power mode represents the
fixture’s highest power output.
To enter full-power mode, tap the Set ( )
button twice. FL will appear on the display.
Both daylight and tungsten LEDs will be
fully illuminated and automatically set to a
color temperature of approximately 4000 K.
The dimmer value can be adjusted, but the
color temperature cannot be changed.
To return to adjustable temperature
mode, tap the Set ( ) button twice. The
color temperature reading will return
to the previously set temperature.
Note: Full-power mode can only be set
from the back panel of the ESBF-75.
When in full-power mode, the brightness
can be adjusted from the back panel and
with the MB-WRT wireless remote.
instructions