User Manual

Escort LED Lights - USER MANUAL
17
OPERATING THE
ESCORT
Open the barndoors and press the
power switch to On. The LED array will
turn on, and the LED display will show
the last settings that were used.
SETTING THE CHANNEL
The Escort features a 2.4 GHz receiver
that enables it to be operated by the
Genaray MB-WRT wireless remote
(sold separately) from up to 98´ (30 m)
away. The Escort offers 99 channels
for controlling setups with multiple
lights and preventing interference from
other remote devices in your area.
To set the channel, follow these steps:
1. Press and hold the Mode ( ) button
until the two-digit channel number
appears on the display.
2. Touch and hold the Plus ( ) or Minus ( )
buttons to increase or decrease the value.
Tap either button to raise or lower
the value by one-unit increments.
3. Press the Set ( ) button to select the
channel and return to the main display.
The Escort and the remote must be set to
the same channel. To set the channel on the
remote, refer to the user manual included
with the Genaray MB-WRT wireless remote.
instructions