User Manual

Crux Bi-Color LED - USER MANUAL
10
INSTRUCTIONS
OPERATING
THE LIGHT
Powering On
To power on the light, slide the power
switch in the direction of either the battery
icon or the plug icon depending on the
desired power source.
Setting the Color Temperature
Tap the color temperature control icons
to change the color temperature in 50 K
increments.
Touch and hold the icon to rapidly scroll to
the desired setting.
Setting the Brightness
Tap the brightness control icons to change
the brightness in 1% increments.
Touch and hold the icons to rapidly scroll to
the desired setting.
Syncing the Crux with Another Light
The Crux CR-10B LED has an integrated
transmitter/receiver that allows you to
control select Crux LEDs from one fixture.
1. Select a channel (A through D) by tapping
the CH icon.
2. Set the other Crux light fixtures to the
same channel.
Select Crux LEDs that are set to the same
channel will duplicate the brightness and
color temperature settings. Any settings
that are changed on one of the lights will
be duplicated on all the other lights.
To stop syncing the lights, tap the CH icon
repeatedly until OFF appears onscreen.