User Manual

Radiance 230-Watt Daylight LED Monolight - USER MANUAL
9
POWERING THE
RADIANCE
ATTACHING THE
REFLECTOR
AC POWER
Important
The Radiance is a multivoltage fixture
capable of running on 100–240 V, 50/60 Hz.
The included cable has a 120 V, 50 Hz plug.
To use this fixture with other voltages, you
must use a plug adapter (sold separately).
Connect the AC power adapter to
the Radiance with the 9-pin cable,
and use the power cable to connect
the adapter to an outlet.
Warning
The Radiance is a very powerful
light. Do not look directly into the
light while it’s being switched on.
Turn the power supply switch to the
(=) position. The LCD screen will
illuminate, and the Radiance will
power on to the last settings.
The Radiance is outfitted with a
Bowens mount that’s compatible with
most Bowens-mount accessories.
1. Align the mounting studs on the reflector
with the mounting slots on the fixture.
2. Insert the reflector, and turn it
clockwise until it clicks into place.
To remove the reflector, push and hold
the Bowens-mount release, and turn
the reflector counterclockwise.
instructions