User Manual

Torpedo Portable Focusing LED - USER MANUAL
8
OPERATING THE
TORPEDO
Using the Barndoors
Unfold the barndoors to shape the beam and
prevent light spill.
Using a Diffuser or Filter
The Torpedo comes with two diffusers of
different densities and three colored filters.
To insert a diffuser or filter, follow these steps:
1. Unscrew the barndoors from the
focusing ring.
2. Place the filter or diffuser over the lens. It
will fit into the lens’s beveled inner edge.
3. Replace the barndoors by screwing them
onto the focusing ring.
2
Adjusting the Light
With the light turned on, press the up and
down buttons to adjust the brightness from
1% to 100%, in 1% increments.
Adjusting the Color Temperature
(BLT-60B Only)
1. Press the Mode button so the color
temperature blinks on the display.
2. Use the up and down buttons to adjust the
color temperature.
3. Press the Mode button again to set the
color temperature.
INSTRUCTIONS