RSF-11 Mini Moon 11 IN.
THANK YOU FOR CHOOSING GENARAY Mini Moon INTRODUCTION The Genaray Mini Moon LED light is a thin and portable fixture that provides photographers and videographers with a natural and soft continuous light source with broad coverage. This 600-LED fixture casts a bright beam for a fixture in this size class, and an integrated diffuser furnishes a soft wraparound-quality and singleshadow beam. The Mini Moon operates on either on AC or battery power and will accept either NP-F or V-mount batteries.
PRECAUTIONS · Handle the unit with care. · Keep this unit away from water and any flammable gases or liquids. · Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Genaray will not be responsible for any damage. · Make sure the unit is powered off when plugging it into a power source. · Do not stare directly at the lights when they are powered on. · Do not use 26-volt V-Mount batteries with this fixture. Doing so will damage the unit and void the warranty.
Accessory shoe mount Diffuser PRODUCT OVERVIEW Tilt Adjustment Knobs Yoke 1/4-20 threading mounting socket Locking knob 4 Mini Moon 11 in. Bi-Color LED Light - USER MANUAL 2-way 5/8 in.
V-mount battery plate NP-F battery plates LCD screen Color temperature knob Color temperature quick adjust (+ or -400 K) Channel/ DMX address Battery status Brightness Color temperature D-tap connector DMX selector button Channel selector button DMX output port DMX input port Power switch Dimmer/channel knob Power socket Mini Moon 11 in.
CONTENTS INCLUDE · LED with yoke · AC adapter Contents · Power cord POWERING THE MINI MOON The Mini Moon can be powered directly from an AC outlet, two NP-F batteries, or one V-Mount battery. · User manual · Carry case MOUNTING THE MINI MOON Mount the Mini Moon on any light stand with a 5/8-inch stud, and turn the locking knob until secure. If the yoke is removed, the Mini Moon can also be mounted on a tripod via the 1/4-20 socket on the bottom of the fixture.
Important Use only V-mount batteries with a maximum of 14.8 volts per battery. Two NP-F batteries must be attached to the Mini Moon to power the light. INSTALLING NP-F BATTERIES When attaching batteries, make sure the power switch is in the off position and the fixture is not plugged into a wall outlet. To turn on the fixture, move the power switch to the DC position.
OPERATING THE MINI MOON USING THE MB-WRT WIRELESS TRANSMITTER ADJUSTING BRIGHTNESS AND COLOR TEMPERATURE The MB-WRT Wireless Transmitter (sold separately) facilitates color temperature adjustment from 3200 to 5600 K as well as brightness adjustment from 100% to 10%. The MB -WRT can operate the Mini Moon, as well as Genaray’s Full Moon LED and other light fixtures, from up to 98 feet (30 m) away. Instructions Power the Mini Moon on. The LCD screen will show the last setting that was used.
3. Press the channel select button to set the channel. The channel icon will stop blinking. The Mini Moon supports DMX-512 so the light’s settings can be remotely controlled from a DMX console. Refer to the MB-WRT user manual to set the channel on the transmitter. Note When the Mini Moon is in DMX mode, the adjustment knobs are disabled. Adjust the brightness and color temperature via the DMX console. Important Make sure the channel on the Mini Moon matches the MB-WRT.
PRODUCT SPECIFICATIONS To set the DMX address on the Mini Moon: Specifications · Press the DMX selector button to switch to DMX mode. The DMX icon will appear onscreen. · Press the channel select button. The channel icon will blink. · While the channel icon is blinking, use the dimmer/channel knob to select a DMX channel from 01 to 512. · Press the channel select button to set the channel selection.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG1
