User Manual

MonoBright LED Daylight 1200 - USER MANUAL
21
REPLACING
THE FUSE
The MonoBright’s user-replaceable
fuse protects the unit’s circuitry. The
fuse is located on the rear of the unit.
To replace the fuse, follow these steps:
1. Turn off the MonoBright and
unplug the power cable.
2. Use a small Phillips screwdriver to
remove the fuse bay. Push in and
rotate in the direction of the arrow
until the fuse bay is protruding.
3. Remove the old fuse and
replace it with a spare.
4. Reinsert the fuse bay into the
MonoBright. Push in and rotate in
the opposite direction of the arrow
until the fuse bay is fully installed.
INSTRUCTIONS