User Manual

MonoBright LED Daylight 1200 - USER MANUAL
19
3. Set the transmitter’s channel to 00
and quickly press the transmitter’s
power ( ) button to confirm.
4. Press the transmitter’s mode ( )
button repeatedly to cycle through the
modes until the transmitter’s blue ( )
status LED glows to indicate output
mode. Use the transmitter’s plus ( )
and minus ( ) buttons to adjust output.
The MonoBright units’ outputs will
change incrementally while maintaining
different outputs. When controlling
multiple outputs, 00 will appear on the
transmitter’s display in all modes.
will glow. Use the plus ( ) and
minus ( ) buttons to select the
channel that corresponds to
the desired MonoBright unit.
b. Press the transmitter’s mode
( ) button repeatedly to cycle
through the modes until the
transmitter’s blue ( ) status LED
glows to indicate output mode.
Use the transmitter’s plus ( )
and minus ( ) buttons to adjust
the MonoBright’s output.
c. Repeat steps 2a and 2b for
the other MonoBright units
in your lighting setup.
INSTRUCTIONS