User Manual

MonoBright LED Daylight 1200 - USER MANUAL
16
*Note: The transmitter incorporates a
bicolor mode (indicated by the transmitter’s
orange ( ) status LED) that has no effect
on daylight-only models, such as this one.
TURNING ON THE TRANSMITTER
AND SETTING THE CHANNEL
To turn on the transmitter, press the
transmitter’s power ( ) button.
Make sure the transmitter and the
MonoBright are set to the same
channel. To set the transmitter’s
channel, follow these steps:
1. Press the transmitter’s mode ( )
button repeatedly to cycle through
the modes until the channel mode
appears on the transmitter’s display.
In channel mode, neither of the
transmitter’s status indicators will glow.
You can use the wireless transmitter to
control the MonoBright unit remotely
from a distance of up to 98´ (30 m).
The transmitter lets you adjust power
output and activate sleep mode. You
can also use the transmitter to control
multiple MonoBright units, even if
they are set to different channels.
Before using the wireless transmitter,
make sure the MonoBright is turned on.
INSTRUCTIONS
THE WIRELESS
TRANSMITTER
Bi-Color
Orange (
)
Channel
None
Power Output
Blue (
)
ChannelPower Output
Press the Mode button to cycle through the
three modes. The status LEDs indicate the
current mode.