User Manual

MonoBright LED Daylight 1200 - USER MANUAL
14
12 V DC BATTERY
To power the MonoBright via a 12 V DC
battery, make sure both the MonoBright
and the battery are turned off, and use
a compatible Genaray MonoBright
battery cable (available separately)
to connect the MonoBright’s DC XLR
power socket to your 12 V DC battery.
For batteries with an XLR connector,
use the Genaray MB-BCXLR cable. For
batteries with a cigarette lighter connector,
use the Genaray MB-BCCL cable.
Note: Use only Genaray MonoBright
battery cables with MonoBright LED lights.
Cables from other manufacturers may be
incompatible and may cause damage.
Important!
Make sure to connect and disconnect the
XLR plug only when the MonoBright’s
power switch is in the Off position, and
your 12 V DC battery is turned off if
it has a power switch. Make sure the
connections to the MonoBright and
battery are secure before turning on
the MonoBright and battery power.
To turn on the MonoBright, first turn on your
12 V DC battery (if it has a power switch) and
then press the MonoBright’s power switch.
INSTRUCTIONS