User Manual

MonoBright LED Daylight 1200 - USER MANUAL
12
Note: When installing an accessory with
an umbrella hole, such as the included
reflector, make sure the accessory’s
umbrella hole is aligned with the
MonoBright’s umbrella receptacle
located above the mounting socket.
2. Insert your accessory into the
S-mount and rotate it clockwise
until it locks into place.
If desired, the included diffuser cover
can be placed over the 7˝ reflector
to help soften the light output.
To remove the accessory, pull the
accessory release and rotate the
accessory counterclockwise.
When mounting a softbox, make sure your
softbox’s speed ring is compatible with
the S-mount. For example, if you want to
mount the Raya 32˝ Octa Soft Box, which
is proprietary to the Raya Speed Ring,
you would need to make sure that the
Raya Speed Ring is compatible with the
MonoBright. In this case, the Raya Speed
Ring is compatible with the MonoBright’s
S-mount, so you’re good to go.
THE UMBRELLA RECEPTACLE
The MonoBright is built with an integrated
umbrella receptacle. To install an
umbrella, insert your umbrella shaft into
the umbrella receptacle and tighten the
umbrella thumbscrew until secure.
INSTRUCTIONS