User Manual

MonoBright LED Daylight 1200 - USER MANUAL
11
MOUNTING
ACCESSORIES
THE ACCESSORY MOUNT
After mounting the MonoBright, you
will need to install the reflector or
another light modifier. The MonoBright
is equipped with an S-type accessory
mount for attaching light-shaping tools
like softboxes, beauty dishes, and snoots,
as well as the included 7˝ umbrella/
grid reflector with an umbrella hole.
Before mounting an accessory, remove
the transport cover by pulling the
accessory release and rotating the
transport cover counterclockwise.
To install an accessory, follow these steps:
1. Align your accessory’s mounting
pegs with the corresponding notches
on the MonoBright’s S-mount.
INSTRUCTIONS