User Manual

STEP 6 - Install the Lighting

a. Remove the center bolt and washer on the front fork. This may be

on the back or front of the fork’s arch.

Align the light bracket against the front fork, thread the center

bolt through the fork and light bracket, attach the bolt on the

back side and tighten.

STEP 5 - Install the Pedals

a. Determine which pedal is LEFT and which is RIGHT by looking at the

sticker placed on the pedal.

b. Lightly grease the threads. This will prevent metals from binding

over time.

c. Thread the RIGHT pedal by hand onto the chain-side crank arm in

a clockwise direction.

d. Use an open wrench to tighten the pedal securely.

e. Repeat steps C and D with the LEFT pedal. The threads will be

reversed and should be tightened in a counterclockwise direction.

WARNING: The right and left pedals have threads that work in opposite directions. The right pedal is screwed into

crank arm in a clockwise direction. The left pedal is screwed into the crank arm in a counterclockwise direction.

Attempting to screw in a pedal in the wrong direction may result in stripping the threads of the pedal.

STEP 7 -Connect Throttle & Electrical Cables

Please ensure all throttle and other electronic cables are

connected. They are color coded. Plugs may need to be rotated

and mating keys aligned before it can be slid together.