User Manual

4b 4c 4d
4a
4e 4f 4g 4h
f. Mount the wheel to the fork carefully guiding the brake pads onto the rotor. The axle should fit into the fork snugly.
g. Tighten the quick release bolt until considerable force is needed to close the quick release lever. The opposite bolt cover needs to be
held in place as you twist the quick release lever.
h. The lever should tighten down to the fork without going past. It is best practice that the lever aligns parallel to the fork to avoid getting
caught on an obstacle. Spin the wheel to check for any wobble. Adjust if needed.
i
. With your legs straddling the front wheel, make final adjustments to handlebars so that they are perpendicular to the front wheel.
STEP 4 - Install Front Wheel on Fork (continued)
13