User Manual

LIST OF LOOSE PARTS & CONTENTS

Contained in the bike parts box you will need:

• Assembled bike frame with rear tire

• Front Tire

• Handlebars

• Seat & Seat Post

• Parts Box(es) including

Left & Right Pedals

Lights

Battery Charger

Keys (2)

Front Wheel Quick Release

Tool Bag

BOX OPENING:

•

Box must be oriented so that the bike design printed on the outside is upright, with the top text “Ride

with GEN3“ reading left to right.

•

To minimize the risk of damage, please keep foam on bike unless it needs to be removed to

complete the assembly step. After assembly is complete, remove any remaining foam.

•

To open the box safely, cut box open at corners and after cuts are complete, gently fold out and

lower the front panel completely onto the floor.

•

Remove front tire from box.

STEP 1 -Bike Stand and Components

•

It is recommended to use a bike stand for ease of assembly. If you do not have access to a stand,

please protect the bike on the floor with a soft surface such as the broken-down bike box as noted

above, or a rug. Keep the back tire in the foam insert for stability.

•

Carefully use snips or a box knife to cut off the zip ties, being careful not to scratch or damage the

bike. Confirm you have all listed parts and accessories before starting the assembly. Please do not

dispose of the packaging until after the no-questions asked return period has passed.

Balance bike on ground for assembly

Assembly

Recommended Tools (not included):

• Gloves

• Bike Grease

• Tire Pump

• An additional person to help with heavy lifting

PLEASE NOTE: This section covers assembly for all GEN3 Bikes

including: The Flex, The OutCross, The Stride, and The Groove.

Cut down box to use as assembly mat

Assemble your bike:

Scan the QR Code

or go to