Quick Installation Guide

• Insert the cable into the sealing gland base and connect it to the

RJ-45 connector at the bottom of the CPE. Make sure the connector

is completely inserted and tightened.

• Insert the rubber bushing on the cable into the gland base.

• Tighten the gland nut. Use the dedicated tool for fastening the

sealing glands.

Indoor Connection

1. It is assumed that the RJ-45 is already connected to the LTE outdoor

CPE. Assemble an RJ-45 connector with a protective cover on the

other end of the LTE outdoor CPE cable.

2. Connect the other end of the RJ-45 cable to the PoE adaptor which

labeled “PoE”.

3. Connect RJ45 cable from PoE adaptor which label “LAN” to a

PC/NB/Hub/Switch.