Quick Installation Guide

Connecting the Cables

Outdoor Connection: Connect a grounding cable between the Ground

terminal of the LTE outdoor CPE and a good ground connection.

Preparing and connecting the cable: Use only 5E 4x2x24# FTP (or

above) outdoor Shielded Patch Cable from an approved manufacturer.

1. Insert the RJ-45 cable:

Insert the Cat5 RJ-45 cable into the sealing gland base and connect it

to the RJ-45 connector at the bottom of the ODU, labeled. Make sure

that the connector is completely inserted and tightened.

((Suggest to use Cat 5E 4x2x24# F/STP outdoor Shielded Patch Cable))

((The total length of the Ethernet cables from the ODU to the IDU’s RJ-45

(WAN) PoE port. Must not exceed 100m))

2. Connect the cable

• Remove the sealing cable gland plug from the gland nut.

• Open the sealing gland nut and remove it. Don not disassembles

the gland base from the bracket.