Quick Installation Guide

Installing LTE outdoor CPE

Selecting a Location: LTE Outdoor CPE should be pole-mounted

outdoors and aligned so its antenna faces the nearest LTE eNB. When

selecting a suitable location for the unit, consider these guidelines:

• Place LTE Outdoor CPE as high as possible to achieve the best

possible link quality.

• Place the LTE Outdoor CPE away from power and telephone lines.

• Avoid placing LTE Outdoor CPE too close to any metallic reflective

surfaces.

• Be sure to ground LTE Outdoor CPE with an appropriate grounding

wire (not included) by attaching it to the grounding screw on the unit

and to a good ground connection.

Mounting the ODU: Mount LTE Outdoor CPE on a 1”-4” pole using the

supplied kit, or the optional tilt accessory.

• Using the clamp

1. Thread the M10*100mm bolt through a spring washer, flat

washer and the bracket holes.

2. With the connector facing downward, attaches LTE Outdoor CPE

to a 1”-4” pole.

3. Attach the bracket to the other side of the pole.

4. Thread the M10*100mm bolts through both holes on either side,

and tighten the nuts.