User's Manual

Advanced setupDNS Settings
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
8-3
............................................................................................................................................................................................................................................................
DNS Settings
The DNS Settings window enables you to configure the domain name and IP address of
the domain name.
Note: You can set up to 64 entries.
Select DNS Settings in the Advanced Setup menu to access the DNS Settings window;
see Figure 8-2.
Figure 8-2 DNS Settings window
Table 8-2 describes the fields of the DNS Settings window.
Table 8-2 Field descriptions
Interface Select LAN or WAN(DHCP1) interface. The
packets sent to the addresses of the destination
IP address are sent through this interface.
However, for the WAN interface it will depend
on the WAN configuration you choose and how
it is defined.
Dynamic Routing Select Enable to use dynamic routing instead
of static. Dynamic routing enables the router to
adapt to changes in the network and exchange
rating tables with other routers. Select Disable
to turn off dynamic routing.
Apply Changes Click to save your changes.
Field Description
Field Description
Domain Name Enter the domain name to which you want to
connect.
IP Address Enter the IP address of the Static DNS.