User's Manual

............................................................................................................................................................................................................................................................
WiFi SecurityWiFi setup
6-4
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
WiFi Security
WiFi security enables you to configure the WEP, WPA, or WPA2 security settings.
Select WiFi Security in the WiFi Setup menu to access the WiFi Security window; see
Figure 6-2.
SSID 1 to 4
SSID Enter an SSID name (maximum of 32
characters). The SSID is an alphanumeric name
shared by all the devices on the wireless
network. It must be unique.
Broadcast SSID Select On to broadcast the SSID or select Off to
hide the SSID.
TxRate Select Auto to automatically determine the
transmission rate or manually select a
transmission rate (maximum 54Mb/s).
IGMP Enable Enable to use IGMP or disable to turn off
IGMP.
WDS Select Enable to use WDS or select Disable to
turn off WDS.
Note: If you enable WDS, ensure that all
other WDS APs are enabled, configured with
the same channel, SSID, and encryption keys,
and that each AP has a different LAN port IP
address.
Other WDS Station Enter the wireless MAC addresses of other
wireless APs or routers that are in the same
WDS.
Apply Changes Click to save your changes.
Field Description