User's Manual

WiFi setupWiFi Settings
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
6-3
............................................................................................................................................................................................................................................................
Multiple SSID Select the number of SSIDs:
• 1
• 2
• 4
Tx Power Enter a value between 1 and 100 to control the
transmitting signal strength.
Radio Mode Select the wireless mode:
• 802.11b/g
• 802.11g/n
• 802.11b/g/n
• 802.11b
• 802.11g
• 802.11n
Auto Channel Select Select On to let the wireless access point
automatically select a channel with the least
interference. Select Off to configure manually.
Select Now to set the channel automatically
one time.
Channel If Auto Channel Select is off, you can manually
select a channel for the wireless access point.
The default is 1.
Beacon Period Enter a beacon period in milliseconds to
determine the frequency of the beacon to keep
the network synchronized. This is optional.
DTIM Period Enter a value to set the delivery traffic
indication message. The DTIM field is a
countdown field informing clients of the next
window for listening to broadcast and multicast
messages.
Bandwidth Select to enable channel bonding (20/40Mhz)
or disable channel bonding . If channel bonding
is selected, please also select which extension
channel is been used. Note: Not all wireless
clients support this.
Extension Channel An extension channel is a secondary channel
used to bond with the primary channel to
increase the performance.
Field Description