User's Manual

ManualsBrandsGemtek Technology ManualsElectronics7130 Residential Gateway 6Vz.A2131

Table Of Contents

............................................................................................................................................................................................................................................................

WAN PT M ConnectionsNetwork

5-30

3EQ-10280-AAAA-TCZZA

Edition 01 February 2011

Table 5-15 describes the fields of the QoS Defaults window.

Table 5-15 Field descriptions

Field Description

QoS Classification

Queue

Original ToS Tag (First 3 bits of

DSCP)

Select Original ToS Tag to assign the queue according

to the ToS value of the packet.

Specified Queue Select Specified Queue and enter a queue number (0

to 7) to which the network traffic will be assigned.

Note: When Specified Queue is chosen, you cannot

choose Align CoS with ToS Value.

ToS/DSCP Remarking

Keep Original ToS Select Keep Original ToS to retain the original ToS

value.

New ToS Value Select New Tos Value and enter a queue number (0 to

7) to assign to the network traffic.

New DSCP Value Select New DSCP Value and enter a DSCP value (0 to

63).

CoS (p-bit) Remarking

Keep CoS Value Select Keep CoS Value to retain the original CoS value.

New CoS Value Select New CoS Value to assign CoS for network

traffic.

Align CoS with ToS Value Select to align CoS with ToS value.

Note: This field can only be set if you keep Original

To S Ta g in queue setting.

QoS LAN Classification