User's Manual

ManualsBrandsGemtek Technology ManualsElectronics7130 Residential Gateway 6Vz.A2131

Table Of Contents

............................................................................................................................................................................................................................................................

WAN PT M ConnectionsNetwork

5-28

3EQ-10280-AAAA-TCZZA

Edition 01 February 2011

QoS Defaults

The QoS Defaults window enables you to configure the default QoS policy for each WAN

connection, see Figure 5-18.

Mode Select the mode:

• Select Connect on demand to allow the

gateway to connect to the Internet only when

you are trying to access it. Enter a Max idle

time. If there are no activities in the specified

time period, the CellPipe 7130 RG will

disconnect the connection.

• Select Always on to set the CellPipe 7130 RG

to always connect to the Internet.

• Select Manual and then click Connect to

manually connect the CellPipe 7130 RG to the

Internet. Click Disconnect to disconnect the

connection.

Authentication Method Select the authentication mode:

• CHAP + PAP

• Only MS-CHAP

• Only CHAP

• Only PAP

This is optional. Please consult with your ISP for

more information.

MTU (Bytes) Select Auto to set the MTU to the default (1492) or

select Manual and enter a value in bytes.

Next Click to go to the QoS Defaults window.

Back Click to return to the previous window.

Field Description