User's Manual

............................................................................................................................................................................................................................................................
WAN PT M ConnectionsNetwork
5-22
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
After the second connection is set, you are returned to the WAN PTM Connections
window; see Figure 5-13. The two new connections, default and bridged, appear in the
Overview table.
Figure 5-13 WAN PTM Connections window with MAC based binding
You can only choose Bridge mode with MAC based binding and you can select Static IP,
DHCP, or PPPoE with No LAN/WLAN Binding for CWMP and VoIP.
WAN
VLAN Select Untagged if VLAN tagging is not to be
used for this WAN connection.
Select Always use ID if VLAN tagging is to be
used and enter the VLAN ID number (between 0
and 4094).
CoS Remarking Enter the CoS remarking number.
IP Address Enter the IP address provided by your ISP.
NetMask Enter the subnet mask provided by your ISP.
Next Click to proceed to the next step.
Back Click to return to the previous page.
Fields Description