User's Manual

NetworkWAN PTM Connections
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
5-19
............................................................................................................................................................................................................................................................
Now that you have a default connection, the WAN PTM Connections window with MAC
based binding opens; see Figure 5-11.
WAN
VLAN Select Untagged if VLAN tagging is not to be
used for this WAN connection.
Select Always use ID if VLAN tagging is to be
used and enter the VLAN ID number (between 0
and 4094).
802.1x Select Enable to use 802.1x or select Disable to
turn off 802.1x. Please consult your ISP for more
information.
Host Name Enter the host name provided by your ISP. Please
consult with your ISP for more information.
Domain Name Enter the domain name provided by your ISP.
Please consult with your ISP for more information.
Vender Class ID If you are required, set the vender class ID to obtain
its lease from the DHCP server. Please consult with
your ISP for more information.
Client ID If you are required, set the client ID to obtain its
lease from the DHCP server. Please consult with
your ISP for more information.
MTU(Bytes) Select Auto to set the MTU to the default (1500) or
select Manual and enter a value in bytes.
Next Click to go to the QoS Defaults window.
Back Click to return to the previous page.
Fields Description