User's Manual

............................................................................................................................................................................................................................................................
WAN PT M ConnectionsNetwork
5-16
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Figure 5-9 Bridge settings window with Port based binding
Table 5-8 describes the fields of Bridge settings window with Port based binding.
Table 5-8 Field descriptions
Fields Description
LAN Binding
LAN Binding Select the port to which you want to bind the
connection.
WLAN Binding Select the SSID to which you want to bind the
connection.
WAN
VLAN Select Untagged if VLAN tagging is not to be
used for this WAN connection.
Select Always use ID if VLAN tagging is to be
used and enter the VLAN ID number (between 0
and 4094).
QoS Queue Enter the QoS queue number.
CoS Remarking Enter the CoS remarking number.
IP Address Enter the IP address provided by your ISP.
NetMask Enter the subnet mask provided by your ISP.
Save Click to save your changes.
Back Click to return to the previous window.
Activate WAN Setting Click to activate the connection.