User's Manual
Table Of Contents
NetworkWAN PTM Connections
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
5-15
............................................................................................................................................................................................................................................................
Bridge
If you select Bridge as the mode in the WAN PTM Connections window, the Bridge
settings window with Port based binding opens; see Figure 5-9.
Service Name The service name is optional. Please consult with
your ISP for information.
Mode Select the mode:
• Select Connect on demand to allow the
gateway to connect to the Internet only when
you are trying to access it. Enter a Max idle
time. If there are no activities in the specified
time period, the CellPipe 7130 RG will
disconnect the connection.
• Select Always on to set the CellPipe 7130 RG
to always connect to the Internet.
• Select Manual and then click Connect to
manually connect the CellPipe 7130 RG to the
Internet. Click Disconnect to disconnect the
connection.
Authentication Method Select the authentication mode:
• CHAP + PAP
• Only MS-CHAP
• Only CHAP
• Only PAP
This is optional. Please consult with your ISP for
more information.
MTU (Bytes) Select Auto to set the MTU to the default (1492) or
select Manual and enter a value in bytes.
Activate WAN Setting Click to activate the connection.
Delete All Click to remove all WAN connections.
Edit Click to make changes to a specific connection.
Delete Click to remove aspecific connection
Next Click to go to the QoS Defaults window.
Back Click to return to the previous window.
Fields Description