User's Manual

ManualsBrandsGemtek Technology ManualsElectronics7130 Residential Gateway 6Vz.A2131

Table Of Contents

NetworkWAN PTM Connections

............................................................................................................................................................................................................................................................

3EQ-10280-AAAA-TCZZA

Edition 01 February 2011

5-13

PPPoE

If you select PPPoE as the mode in the WAN PTM Connections window, the PPPoE

settings window with Port based binding opens; see Figure 5-8.

WLAN Binding Select the SSID to which you want to bind the

connection.

WAN

VLAN Select Untagged if VLAN tagging is not to be used

for this WAN connection.

Select Always use ID if VLAN tagging is to be

used and enter the VLAN ID number (between 0 and

4094).

802.1X Select Enable to use 802.1x or select Disable to

turn off 802.1x.

Host Name Enter the host name provided by your ISP. If you are

unsure of the host name, please consult with your

ISP for more information.

Domain Name Enter the domain name provided by your ISP. If you

are unsure of the domain name, please consult with

your ISP for more information.

Vender Class ID If required, set the vender class ID to obtain its lease

from the DHCP server. Please consult with your ISP

for more information.

Client ID If required, set the client ID to obtain its lease from

the DHCP server. Please consult with your ISP for

more information.

MTU(Bytes) Select Auto to set the MTU to the default (1500) or

select Manual and enter a value in bytes.

Activate WAN Setting Click to activate the connection.

Delete All Click to remove all WAN connections.

Edit Click to make changes to a specific connection.

Delete Click to remove a specific connection.

Next Click to go to the QoS Defaults window.

Back Click to return to the previous window.

Field Description