User's Manual
Table Of Contents
NetworkWAN PTM Connections
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
5-11
............................................................................................................................................................................................................................................................
Figure 5-6 Static IP settings window with Port based binding
Table 5-5 describes the fields of Static IP settings window with Port based binding.
Table 5-5 Field descriptions
Field Description
LAN Binding
LAN Binding Select the port to which you want to bind the
connection.
WLAN Binding Select the SSID to which you want to bind the
connection.
WAN
VLAN Select Untagged if VLAN tagging is not to be used
for this WAN connection.
Select Always use ID if VLAN tagging is to be
used and enter the VLAN ID number (between 0 and
4094).
802.1X Select Enable to use 802.1x or select Disable to
turn off 802.1x.
IP Address Enter the IP address provided by your ISP.
NetMask Enter the subnet mask provided by your ISP.
Gateway Enter the gateway IP address provided by your ISP.
DNS1 to 3 Enter the DNS IP address (these are optional).