User's Manual

NetworkWAN PTM Connections
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
5-9
............................................................................................................................................................................................................................................................
Binding Select a binding method:
• Port Based to bind traffic to the connection by
LAN or WLAN port.
• MAC Based to bind traffic to the connection by
MAC address.
• No LAN/WLAN Binding so that the connection
does not bind traffic to any port or MAC.
Note: You cannot use a combination of Port based
and MAC based binding.
Note: When using MAC based binding, you must
define a Default connection first. This default
connection can be a routed or bridged connection.
After defining the default MAC based connection,
you can add extra bridged (not routed) connections
which are selected on basis of configurable MAC
layer based criteria.
Local Service Enable a local service:
• Enable VoIP to provide VoIP service.
• Enable CWMP to provide remote control
service. It allows a remote server to manage the
gateway
• Enable IGMP Proxy to provide service to be
used for video streaming and gaming.
• Enable Default Route to set the connection as
the gateway of last resort.
Add Click to add the new connection and proceed to the
next configuration window.
Note: After adding new connections, click
Activate WAN Settings to activate the connection.
This button will be only visible if you added a new
connection or made changes to the settings.
Interface Name (read-only) The name of the interface.
Mode (read-only) The selected mode.
VLAN ID (read-only) The VLAN ID.
Default Route All connections will be routed via the default route,
except for the connection that has special routing.
There can be only one default route between all the
connections.
IGMP Proxy Select the interface to support IGMP service.
VoIP Select the interface to support VoIP service.
CWMP Select the interface to support CWMP service.
Field Description