User's Manual

............................................................................................................................................................................................................................................................
WAN Link SelectionNetwork
5-6
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
WAN Link Selection
The WAN Link Selection window specifies which link will be used for the WAN
connection, one of auto-dedicate mode, Gigabit Ethernet, or DSL.
Note: You must reboot the CellPipe 7130 RG to switch from one WAN interface to
another.
Select WAN Link Selection in the Network menu to access the WAN Link Selection
window; see Figure 5-4.
Figure 5-4 WAN Link Selection window
Table 5-3 describes the fields of the WAN Link Selection window.
Table 5-3 Field descriptions
WAN PTM Connections
WAN PTM connections are the connections used when the device operates in DSL-PTM
mode (if you are uncertain whether your DSL service is PTM, contact your ISP). The
WAN PTM Connections window enables you to configure multiple connections.
Field Description
Auto Select to automatically detect the WAN link.
Note: Only one of the two LAN ports should be
physically connected.
Gigabit Ethernet Select to use only the Gigabit Ethernet port as the
WAN link.
VDSL Select to use the VDSL port.
Apply Changes Click to save your changes.